Hello everybody, Since I have noticed a very positive effect on the sound of several end devices through Ethernet isolators directly in front of the end devices when streaming music, I am currently working on their construction and building some myself. Ethernet magnetics are used for isolation, which are also used for coupling with Ethernet…
Easy MDF Board and Batten in our mud room with hidden storage!
submitted by /u/tyberius89 [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Spray paint fumes
Hi, i’ve been spraying a power rack in my bedroom with Aerosol Spray Paint which includes acetone. The windows are open and a fan is on blowing towards the windows. When will it be safe to sleep in the room? I only used a tiny amount. Cheers 🙂 submitted by /u/NeedAnyC [link] [comments] Continue reading…
Chopping board with sliding mitre saw
Is there any issue with ripping boards widths way and then gluing those together to make a chopping board? Instead of cutting lengths and gluing those together? I only see people do this way so just wondering if the opposite would work? I don’t have a table saw only a sliding mitre saw so can’t…
WTB: Tang Band W5-2143 x2
Hi, Looking for a pair or a single of the Tang Band W5-2143. Trying to save as much as possible. They may end up being gift speakers for my little girl who loves music and turns 8 next month. PM me please, as it’s best…I forget to look here or there. Cheers, Continue reading at…
Resistor parasitic inductance
Replaced an old resistor yesterday that I suspected might be part of an oscillation issue I’m trying to track down (it wasn’t). As part of it, I measured its inductance, and the inductance of a couple of replacement parts. I was quite surprised: At 10Khz: Old carbon comp, 200ohm, 0.5W: 200nH Metal film, 220ohm, 1W:…
new clothes for old receiver
looking for someone with decent woodworking skills to build a new box (two side panels and top) for a technics receiver i just got. sorry if this is not the place for this post Continue reading at DIYaudio.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Chicken Coop
submitted by /u/darkhos [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Post Popcorn
I just finished my popcorn removal. Here’s the current state of the ceilings. The ceiling is now in various states of smoothness and torn up a bit and I’m looking for advice on next steps. If it was all pretty even it seems like I would prime and paint. Wondering if I need to do…
Should I put silicone over the the grout at the edges of my tiled shower?
Some cracks have developed in the grout where the tiled walls meet the tiled base of the shower. I have cleaned the grout well but am unsure if I should go over all of the edges with silicone? submitted by /u/redditard90 [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press…
help me chose a 10″ woofer for 3way
hello, i am designing a 3-way classic with an amt tweeter, a 5inch mid, and now im looking for a 9″ or 10″woofer. here are my design requirements: i will have max 30-35l for the chamber, so must work in small chamber at least 100W is there a driver that will perform well in such…
Choosing midranges for off grid system
I am building an off the grid sound system.It is going to be on a bike trailer and main goal is that it is loud (target for 100-200 cyclist pedaling in the street).I don’t want bad quality sound, but I may sacrificed some very high fidelity if can reach more people, the audience are not…
CDP-337ESD (KSS-190A) not working
I am new to this forum, and would be grateful for help. Over the years the drawer of my Sony CDP-337ESD became sluggish. Eventually, it would not come all the way out by itself. So I changed the two belts in the KSS-190a transport to new ones. This improved things, but the speed of the…
Built my wife some built-ins for her bday. Cheated with Ikea cabinets.
submitted by /u/KimcheeBreath [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Couldn’t find a coffee table I liked, so I built my own
submitted by /u/idontwanttousenumber [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Heard folks were posting shed builds. Here’s our cafe-inspired build.
submitted by /u/iis4isaac [link] [comments] Continue reading at Reddit.com: Click Here Top Featured Tags: – DIY Press Release Distribution Service
Free Lightroom alternative: Exporting images in Darktable
This is part four of five in a series. Check out Part 1, Part 2 and Part 3. Now that you’ve completed your editing, you’re ready to share it with the world. But how? Well, the answer lies within this tutorial. It should be noted that edits to your image are not saved directly to…
Threshold 400A how to set bias?
I’ve just rebuilt a threshold 400A that was blown in both channels. I used onsemi MJ121195/96. All seems to have been successful (full power test pending) but I don’t have a bias adjustment procedure for this one. All emitter resistors were changed, as well as all electrolytics except the mains. Continue reading at DIYaudio.com: Click…
Recommend cheap(er) Win media box?
I’m looking for a RELIABLE but ideally cheap(er) “TV Box” that would be used for audio and some video. Requirements (non-negotiable): MUST run Windows, probably win10. I know that Linux is the ultimate, but my audio interface only has win (and Mac) drivers. Yes, I know that Mac is better than Windows, but there is…
How does a back-loaded horn enclosure affect frequency response?
I’m interested in finding out how much bass a back-loaded horn (BLH) design gives in comparison with a bass-reflex one. Unfortunately for me, I couldn’t find an answer with a Google search (I’m bad at physics so the technical papers are impossible for me to comprehend…). I just need somebody to describe all the effects…
I need to pint my poor deck. I read that deck restoration paints chip after a short amount of time but my deck is in SUCH bad shape right now I don’t know if normal pint or stain will help it.
Any advice is appreciated. I would include an image but the auto moderator keeps banning my image posts. Options are to use rust oleum and fill in the cracks of my very old wooden deck. And likely face peeling issues after hurricane season passes. I’m in Florida by the way. Or the other option is…
Public pressures Zuckerberg to give up on Instagram for kids
Last month, there was a word about Instagram releasing a dedicated app specifically for children under 13. Many people criticized the decision, and the pressure on Zuckerberg to give up on it seems to be heating up. Recently, an international coalition of 35 children’s and consumer groups invited Zuckerberg to stop the project, citing everything…
