TopFeatured.com

So, I just bought a new house and I’m wanting to get an induction range for the kitchen. I have found a few that I like, but my favorite is definitely this one, for price range: https://www.sears.com/lg-lse4616bd-6.3-cu-ft-smart-wi/p-A026589244?plpSellerId=Sears&prdNo=5&blockNo=5&blockType=G5

Problem is, it’s a slide in range, and the spot for the oven with my counters is at the end of the countertop. I’ve done the measurements, and with a 29.8 inch width to the range, I’d still have about 9 inches of empty space between the wall and the side of range that is NOT up against the counter. Every source I’ve seen says you absolutely have to have counters on both sides of a slide in range, however.

The issue I have with that is a few things… For one, this range is the exact same dimensions as the one that the previous owners used (even though there’s was freestanding). Second, the typical reason I’ve seen for needing counters on both sides is a lip at the top of the range that basically makes it “hang” on the countertop in a way… This range does NOT have that overhang/lip that other slide ins appear to have. Third, the other big issue is apparently that slide in ranges have unfinished sides? The sides of this one at least LOOK finished.

Also, freestanding induction ranges are a pain to come by and are also, for whatever reason, lacking in a lot of the features that the slide in ones have (true convection, etc).

So, I guess my question is this: If I bought that specific range, would I be able to just put it against my counter top like a regular freestanding range? If not, what would need to be done to get it installed? Would I have to put in 9 inches of countertop on side closest to the wall, or is there another way?

Thanks for any helpful responses.