TopFeatured.com

Hi there! Can you help recommend a modern subwoofer that’s comparable to this subwoofer from the early 2000’s? I really enjoyed this subwoofer. I’m looking for a sub with similar audio output & power handling capabilities. Sub would be in a ported box powered by a Kenwood Excelon KAC-X1R amplifier (800W capable amp). Looking to be in the $200-$300 neighborhood (or cheaper, if possible). Price is not a big driving factor, mostly looking to duplicate audio performance/characteristics and durability with rubber surround and 2 ohm load for the amp.

Any help would be appreciated. I know there are some serious woofer experts on here.

Looking for a comparable subwoofer to this guy (specs below):

MTX T7512-44 (Dual 4 Ohm)
2-3/8″ voice coil
428F high temp flat wound aluminum wire
narrow NBR surround
die cast aluminum basket
Power – 400WRMS

Parameters:

Fs: 40.33 Hz
Qms: 4.60
Cms: 0.081 mm/N
Mms: 193.14 g
Rms: 10.64 kg/s
Vas: 1.093 ft³ (30.95 liters)
Xmax: 0.650 in (16.51 mm)
D: 10.157 in (258.00 mm)
Sd: 81.03 in² (522.79 cm²)
Vd: 52.68 in³ (0.86 liters)
Qes: 1.03
Re: 1.50 Ω
Bl: 8.44 Tm
Prms: 400 Watts
Qts: 0.842
ηο: 0.190 %
SPLo: 84.99 dB
SPL 2.83V/1m: 92.16 dB

Attached Images

MTX-T7512-44.png (226.2 KB)

Hi there! Can you help recommend a modern subwoofer that’s comparable to this subwoofer from the early 2000’s? I really enjoyed this subwoofer. I’m looking for a sub with similar audio output & power handling capabilities. Sub would be in a ported box powered by a Kenwood Excelon KAC-X1R amplifier (800W capable amp). Looking to be in the $200-$300 neighborhood (or cheaper, if possible). Price is not a big driving factor, mostly looking to duplicate audio performance/characteristics and durability with rubber surround and 2 ohm load for the amp.

Any help would be appreciated. I know there are some serious woofer experts on here.

Looking for a comparable subwoofer to this guy (specs below):

MTX T7512-44 (Dual 4 Ohm)
2-3/8″ voice coil
428F high temp flat wound aluminum wire
narrow NBR surround
die cast aluminum basket
Power – 400WRMS

Parameters:

Fs: 40.33 Hz
Qms: 4.60
Cms: 0.081 mm/N
Mms: 193.14 g
Rms: 10.64 kg/s
Vas: 1.093 ft³ (30.95 liters)
Xmax: 0.650 in (16.51 mm)
D: 10.157 in (258.00 mm)
Sd: 81.03 in² (522.79 cm²)
Vd: 52.68 in³ (0.86 liters)
Qes: 1.03
Re: 1.50 Ω
Bl: 8.44 Tm
Prms: 400 Watts
Qts: 0.842
ηο: 0.190 %
SPLo: 84.99 dB
SPL 2.83V/1m: 92.16 dB

Attached Images

MTX-T7512-44.png (226.2 KB)

Hi there! Can you help recommend a modern subwoofer that’s comparable to this subwoofer from the early 2000’s? I really enjoyed this subwoofer. I’m looking for a sub with similar audio output & power handling capabilities. Sub would be in a ported box powered by a Kenwood Excelon KAC-X1R amplifier (800W capable amp). Looking to be in the $200-$300 neighborhood (or cheaper, if possible). Price is not a big driving factor, mostly looking to duplicate audio performance/characteristics and durability with rubber surround and 2 ohm load for the amp.

Any help would be appreciated. I know there are some serious woofer experts on here.

Looking for a comparable subwoofer to this guy (specs below):

MTX T7512-44 (Dual 4 Ohm)
2-3/8″ voice coil
428F high temp flat wound aluminum wire
narrow NBR surround
die cast aluminum basket
Power – 400WRMS

Parameters:

Fs: 40.33 Hz
Qms: 4.60
Cms: 0.081 mm/N
Mms: 193.14 g
Rms: 10.64 kg/s
Vas: 1.093 ft³ (30.95 liters)
Xmax: 0.650 in (16.51 mm)
D: 10.157 in (258.00 mm)
Sd: 81.03 in² (522.79 cm²)
Vd: 52.68 in³ (0.86 liters)
Qes: 1.03
Re: 1.50 Ω
Bl: 8.44 Tm
Prms: 400 Watts
Qts: 0.842
ηο: 0.190 %
SPLo: 84.99 dB
SPL 2.83V/1m: 92.16 dB

Attached Images

MTX-T7512-44.png (226.2 KB)

Hi there! Can you help recommend a modern subwoofer that’s comparable to this subwoofer from the early 2000’s? I really enjoyed this subwoofer. I’m looking for a sub with similar audio output & power handling capabilities. Sub would be in a ported box powered by a Kenwood Excelon KAC-X1R amplifier (800W capable amp). Looking to be in the $200-$300 neighborhood (or cheaper, if possible). Price is not a big driving factor, mostly looking to duplicate audio performance/characteristics and durability with rubber surround and 2 ohm load for the amp.

Any help would be appreciated. I know there are some serious woofer experts on here.

Looking for a comparable subwoofer to this guy (specs below):

MTX T7512-44 (Dual 4 Ohm)
2-3/8″ voice coil
428F high temp flat wound aluminum wire
narrow NBR surround
die cast aluminum basket
Power – 400WRMS

Parameters:

Fs: 40.33 Hz
Qms: 4.60
Cms: 0.081 mm/N
Mms: 193.14 g
Rms: 10.64 kg/s
Vas: 1.093 ft³ (30.95 liters)
Xmax: 0.650 in (16.51 mm)
D: 10.157 in (258.00 mm)
Sd: 81.03 in² (522.79 cm²)
Vd: 52.68 in³ (0.86 liters)
Qes: 1.03
Re: 1.50 Ω
Bl: 8.44 Tm
Prms: 400 Watts
Qts: 0.842
ηο: 0.190 %
SPLo: 84.99 dB
SPL 2.83V/1m: 92.16 dB

Attached Images

MTX-T7512-44.png (226.2 KB)